Dell 1135 Mono Laser User Manual Download

Page: 28 / 138

Select tray (source) and its options, such as paper size and type.

Press

Setting job timeout

When there is no input for a certain period of time, the machine exits the current menu and goes in to the default
settings. You can set the amount of time the machine will wait.

Press

Menu

(

) on the control panel.

Press the left/right arrow until

System Setup

appears and press

Press the left/right arrow until

Machine Setup

appears and press

Press the left/right arrow until

Job Timeout

appears and press

Enter the time using left/right arrow or numeric keypad.

Press

to save the selection.

Press

Stop/Clear

(

) to return to ready mode.

Summary of Contents for 1135 Mono Laser











































































































































Search results

Summary of Contents for 1135 Mono Laser

Reviews:

Related manuals for 1135 Mono Laser

Brands by name

Popular brands

Dell 1135 Mono Laser, User Manual

Search results

Summary of Contents for 1135 Mono Laser

Reviews:

Related manuals for 1135 Mono Laser

Brands by name

Popular brands