Setting the paper size and type
After loading paper in the paper tray, set the paper size and type using the control panel. These settings will apply to
copy and fax modes. For computer printing, select the paper size and type in the application program you use on your
computer (See
Opening printing preferences
).
The settings made from the machine driver override the settings on the control panel.
Setting the paper size
1.
Press
Menu
(
) on the control panel.
2.
Press the left/right arrow until
System Setup
appears and press
OK
.
3.
Press the left/right arrow until
Paper Setup
appears and press
OK
.
4.
Press the left/right arrow until
Paper Size
appears and press
OK
.
5.
Press the left/right arrow to select the paper tray you want and press
OK
.
6.
Press the left/right arrow to select the paper size you want.
7.
Press
OK
to save the selection.
8.
Press
Stop/Clear
(
) to return to ready mode.
If you want to use special-sized paper, such as a billing paper, select
Edit...
in the
Paper
tab in the
Printing
Preferences
(See
Opening printing preferences
).
Setting the paper type
1.
Press
Menu
(
) on the control panel.
2.
Press the left/right arrow until
System Setup
appears and press
OK
.
3.
Press the left/right arrow until
Paper Setup
appears and press
OK
.
4.
Press the left/right arrow until
Paper Type
appears and press
OK
.
5.
Press the left/right arrow to select the paper tray you want and press
OK
.
6.
Press the left/right arrow to select the paper type you want.
7.
Press
OK
to save the selection.
8.
Press
Stop/Clear
(
) to return to ready mode.
Setting the paper source
1.
Press
Menu
(
) on the control panel.
2.
Press the left/right arrow until
System Setup
appears and press
OK
.
3.
Press the left/right arrow until
Paper Setup
appears and press
OK
.
4.
Press the left/right arrow until
Paper Source
appears and press
OK
.
5.
Press the left/right arrow until
Copy Tray
or
Fax Tray
appears and press
OK
.
6.
Press the left/right arrow to select the paper tray you want.
7.
Press
OK
to save the selection.
8.
Press
Stop/Clear
(
) to return to ready mode.
Using the output support
The surface of the output tray may become hot if you print a large number of pages at once. Make sure that you
do not touch the surface, and do not allow children near it.
The printed pages stack on the output support, and the output support will help the printed pages to align. The printer
sends output to the output tray by default. To use the output tray, make sure that the rear cover is closed.