Dell 1135 Mono Laser User Manual Download

Page: 110 / 138

Close the front door. Make sure that the cover is securely closed.

Checking replaceable’s lifespan

If you experience frequent paper jams or printing problems, check the number of pages the machine has printed.
Replace the corresponding parts, if necessary.

Press

Menu

(

) on the control panel.

Press the left/right arrow until

System Setup

appears and press

Press the left/right arrow until

Maintenance

appears and press

Press the left/right arrow until

Supplies Life

appears and press

Press the left/right arrow until the item you want appears and press

Supplies Info

: Prints the supply information page.

Total

: Displays the total number of pages printed.

ADF Scan

: Displays the number of pages scanned using the ADF.

Platen Scan

: Displays the number of pages scanned using the scanner glass.

Press

Stop/Clear

(

) to return to ready mode.

Summary of Contents for 1135 Mono Laser











































































































































Search results

Summary of Contents for 1135 Mono Laser

Reviews:

Related manuals for 1135 Mono Laser

Brands by name

Popular brands

Dell 1135 Mono Laser, User Manual

Search results

Summary of Contents for 1135 Mono Laser

Reviews:

Related manuals for 1135 Mono Laser

Brands by name

Popular brands