Dell 1135 Mono Laser User Manual Download Page 103

Page: 103 / 138

Select

Uninstall

and click

Uninstall

When the message which warns that all applications will close on your computer appears, Click

Continue

10.

When the uninstall is done, click

Quit

Linux

Install Linux Driver

Make sure that the machine is connected to your network and powered on. Also, your machine’s IP address
should have been set.

Insert the supplied software CD into your CD/DVD drive.

Double-click CD-ROM icon that appears on your Linux desktop.

Double-click the

Linux

folder.

Double-click the

install.sh

icon.

The

Dell Installer

window opens. Click

Continue

The Add printer wizard window opens. Click

Next

Select Network printer and click

Search

button.

The Printer’s IP address and model name appears on list field.

10.

Select your machine and click

Next

Add network Printer

Double-click the

Unified Driver Configurator

Click

Add Printer…

The

Add printer wizard

window opens. Click

Next

Select

Network printer

and click the

Search

button.

The printer’s IP address and model name appears on list field.

Select your machine and click

Next

Input the printer description and

Next

When the add printer is done, click

Finish

IPv6 Configuration

TCP/IPv6

is supported properly only in Windows Vista or higher.

If the IPv6 network seems to not be working, set all the network setting to the factory defaults and try again (See

Restoring factory default settings

To use the IPv6 network environment, follow the next procedure to use the IPv6 address:

Connect your machine to the network with a network cable.

Turn on the machine.

Print a

Network Configuration Report

from the machine’s control panel that will check IPv6 addresses.

Press

Menu

(

) on the control panel.

Press the left/right arrow until

Network

appears and press

Press the left/right arrow until

Network Info.

appears and press

Press the left/right arrow until

Yes

appears and press

Select

Start

Control Panel

Hardware and Sound

Printers

Add Printer

Click

Add a local printer

on the

Add Printer

windows.

Follow the instruction on the window.

If the machine does not work in the network environment, activate IPv6. Refer to the next section followed by.

Activating IPv6

The machine is provided with IPv6 feature on.

Press

Menu

(

) on the control panel.

Press the left/right arrow until

Network

appears and press

Press the left/right arrow until

TCP/IP (IPv6)

appears and press

Press the left/right arrow until

IPv6 Activate

appears and press

Press the left/right arrow until

appears and press

Summary of Contents for 1135 Mono Laser











































































































































Search results

Summary of Contents for 1135 Mono Laser

Reviews:

Related manuals for 1135 Mono Laser

Brands by name

Popular brands

Dell 1135 Mono Laser, User Manual

Search results

Summary of Contents for 1135 Mono Laser

Reviews:

Related manuals for 1135 Mono Laser

Brands by name

Popular brands