DESIGNER’S HANDBOOK 4189350049C EN
Page 119 of 206
10.2.1.1
Colour shift source in mode 1
In mode 1, the source used to make the colour selection can be:
NONE-fixed colour!
Select this setting if a fixed design is needed (Day, Dusk or Night).
Digital I/O option
Parameter is received from digital input, when the digital input
dimmer mode supporting colour shift is selected.
XDi-net (DAM-MPDO)
Parameter is received via CAN using XDi-net format or received in a
DAM-MPDO.
PDO converter
Parameter is received via CAN in a TPDO or RPDO, and has to be
predefined in the selected PP.
Front buttons
Front b.& Digital opt.
Reserved for future XDi-N version
(Not available in this version)
10.2.1.1.1
Colour shift using XDi-net or DAM-MPDO
This selection has no setup menu. The colour pallet selection is received in sub-index 0x03 of the dimmer group
object index range in the table above. The selection is located in an unsigned 8 bit field using only 2 bits (LSBs).
The 2 bit selection values are:
00 = Day
01 = Night
10 = Dusk
11 = Reserved
See the
“XDi-net/CANopen reference manual” for details.
10.2.1.1.2
Colour shift using PDO converter
If the colour shift is defined in the Product Profile (PP) to be received using a TPDO or RPDO, then a PDO
converter is used as the input source for colour shift. The PDO converter can select any 2 bits in the 8 byte data
package and use them as colour shift input. This means that it is possible to map colour shift parameters for all 9
dimmer groups in one TPDO using only 3 data bytes with data for up to 4 groups in each byte.
