DESIGNER’S HANDBOOK 4189350049C EN
Page 27 of 206
3.6.1
Installation Wizard
XDi has an installation wizard which starts automatically start at power up until the XDi unit has been set up.
After first time setup,
the normal menu structure is available offering “Surveyor info display”, “Master reset” and
access to the user and installation menus. Access to these functions requires a simultaneous long push on a
combination of two buttons.
The installation menu system is protected by double access sequence. First a long push on a combination of two
push-buttons to access the user menu and from there a hidden long double push to access the installation menu.
This is part of the required protection against unauthorised changing of vital setup parameters.
The menu structure has therefore 2 levels:
User menu level, where information and basic setup parameters, like dimmer setup, are located. (User accessible)
Installation menu where all vital setup parameters are located. (Limited access)
Fig. 5. Diagram illustrating the overall XDi menu structure.
Note: Single push on front button 2 and 3 can be used for front button dimming on all XDi versions.
3.7
Surveyor info
It should be highlighted that a simultaneous push on button 1 and 2 (from the
left) will reveal the “Surveyor info”
page where serial number, MED approval marking, software version and other relevant data are presented.
