LS10 Installation and Operating Guide
Page 54
LS10 Installation & Operating Guide
Document # 9301H66300 Ver. 1.01
Offset
The offset control appears only for phantom speaker options. It allows the level for that speaker to be
adjusted before being mixed with the left or right speaker. The offset level can be adjusted from +3dB to -
10dB.
Table 11 shows the possible types of speaker configuration options available when the speaker
configuration includes one or two subwoofers.
Table 11. Speaker Option with One or Two Subwoofers
Controls Applicable
Channels
Diagram
(replace center with
applicable channel)
Description
Large
All
No modifications to channel
Small,
Enable High
Pass
All
Crossed with LFE
High pass on channel audio
Low pass to LFE
Small,
High Pass
Not Enabled
Center, Left/Right
Channel audio is crossed with
LFE
Low pass to LFE
Small, cross
to (other
speaker)
Depends on speaker:
C cross to L/R
Ls/Rs cross to L/R
Lb/Rb cross to L/R
HL/HR cross to L/R
HC cross to C
HLs/HRs cross to
Ls/Rs
T cross to L/R/LS/RS
When this option is used, the
"other" speaker must be large.
If it is not, there will be an error
message in
red text
displayed
below the diagram on the
screen.
Phantom
Center
Center
Center channel offset and
mixed with Left and Right
channels.
Phantom
Surround
Left Surround/
Right Surround
Left Surround offset and mixed
with Left channel
Right Surround offset and
mixed with the Right channel.
