LS10 Installation and Operating Guide
Page 65
LS10 Installation & Operating Guide
Document # 9301H66300 Ver. 1.01
HDMI Debug Logging
– This is normally set to
Off
. Select
Log to hsrdbg.txt
to create a log file. The
log file is helpful for debugging by Datasat Digital Entertainment staff. You may be asked by the Datasat
staff to save the diagnostic information including the log files on the USB Flash drive, to send for
troubleshooting purposes.
Read EDID
– Press this button to see extended display identification data (EDID). Use a mouse wheel or
the keyboard up/down arrows to scroll through the data displayed.
3.13 USB Save/Restore
Press the
USB
button on the
Setup Home
screen to open the
USB Save/Restore
screen.
Figure 46. USB Save/Restore
Use this screen to save your configuration on a USB storage device, or to load from a USB. Select an
activity on the left, then tap
Copy
on the right.
You can save the following:
•
LS10
Configuration
•
Master
Configuration
•
Diagnostic Information – (the system log file) for use in troubleshooting the system
You can load the following from a USB drive:
•
LS10
Configuration
•
Master
Configuration
•
Custom
GUI
These functions (above) are identical to the following USB functions available through the touch screen
display.
•
Save LS10 Configuration = [Save]
•
Save Diagnostic Information = [Diag]
•
Load LS10 Configuration = [Load]
