LS10 Installation and Operating Guide
Version 1.01
Appendix F. USB Audio Interface
F-3
Document #: 9301H66300 Ver. 1.01
Download the package Datasat_USB_1_03.zip for Windows 8, 7, and XP: Unified USB Drivers
1.03 (20MB)
Download the Windows Vista package Datasat_USB_1_03_Vista.zip: Vista Drivers 1.03 (7MB)
These packages can be found on the Datasat Digital Entertainment website
www.datasatdigital.com
in the LS10 support documents section under “Software”.
Once you've downloaded the drivers, follow the steps below:
1. If an earlier 'CMEDIA USB 2.0 Audio Device' driver is installed on your computer, please
uninstall it. (From Control Panel choose Programs and select Uninstall a program).
2. Unplug your Datasat USB input from the computer if it is connected.
3. Go to the download location of the Windows drivers
4. Extract the files from Datasat_USB_1.03.zip.
5. Click on the folder CM6631_6631A_-1.03(CR) to open it.
6. Connect your Datasat LS10 with a standard USB cable, preferably no longer than 2
meters.
7. Double-click on setup.exe. This will automatically select the correct driver for your
version of Windows.
Figure 4
8. Follow the prompts from the installation program to install the drivers. You may have to
restart your computer.
9. In your Control Panel/Audio Devices, select Speakers: Datasat Audio. In Windows 7,
select
Sound > Playback > Speakers
.
