LS10 Installation and Operating Guide
Page 81
LS10 Installation & Operating Guide
Document # 9301H66300 Ver. 1.01
4.1.9 HP/LP Filter
The slope can be set at either 12dB/octave or 24dB/octave. The cutoff frequency can be set between
31Hz and 160Hz.
4.1.10 Offset
The offset control appears only for phantom speaker options. It allows the level for that speaker to be
adjusted before being mixed with the left or right speaker. The offset level can be adjusted from +3dB to -
10dB.
5.0 Maintenance
Check the Datasat Digital Entertainment Online Support site, at
www.datasatdigital.com/docs/consumer,
select
LS10 – Support Documents
for the latest information on maintenance, troubleshooting, and LS10
software versions.
5.1 Routine Maintenance
We recommend that every six months you vacuum the outside of the unit to remove dust, especially
around ventilation holes.
Clean the touch screen as needed with a soft cloth and non-abrasive cleaning solution suitable for
cleaning touch screens.
5.2 Error Messages
5.2.1 Software Installation
Figure 61. USB Device Not Found
If you encounter this error message, be sure you have inserted a USB device into the LS10. If a device is
present, it may be malfunctioning. Replace the USB device with another to see if the problem is resolved.
