LS10 Installation and Operating Guide
Page 26
LS10 Installation & Operating Guide
Document # 9301H66300 Ver. 1.01
1.6.2 DTS Neo:X
DTS Neo:X is available for all speaker configurations except 2.0 and 2.1. Neo:X takes source content
from 2 channel, 5.1 or 7.1 content and expands it up to 11.1 (7.1 plus front wide and front high speakers),
depending on which speakers are enabled in the LS10 speaker configuration.
Figure 15 shows the audio processing setup with
DTS Neo:X
selected.
Figure 15. DTS Neo:X Cinema Mode
These are configuration options for DTS Neo:X mode:
•
Cinema–
Neo:X Cinema should be used for a movie presentation. This mode offers an
enhanced Center channel for dialogue.
•
Music
– In
Neo:X Music mode, use of the Center channel is more controlled to prevent
narrowing of the front of the musical soundstage.
•
Game
– Neo:X Game mode enhances directionality. It offers the greatest degree of channel
to channel separation, delivering discrete sound localization from Front Height or Wide
channels.
•
2-Ch content
: Extract SW Off/On – if set
ON
, then when the unit receives 2-channel source
content a subwoofer channel will be created from the low frequencies of the content. If set
OFF
, there will be no subwoofer output with 2-channel source content.
