LS10 Installation and Operating Guide
Page 33
LS10 Installation & Operating Guide
Document # 9301H66300 Ver. 1.01
2.1 Unpacking System Components
See the list of standard components for an LS10 shipment, on page 13. The exact contents may vary,
depending on the options you have ordered.
Note
: Refer to the actual packing slip from your order to verify the contents of your
shipment. Contact Datasat Digital Entertainment immediately if items listed on your
packing slip are missing.
2.1.1 Preliminary Inspection
Before installing the LS10 unit, take a complete inventory of system components to minimize problems or
questions during installation. Check for scratches or other damage to the LS10.
Save all packing materials until installation is complete in case you need to return parts to the factory.
2.2 Installation Overview
The LS10 chassis is the main component of the LS10 system. Installation procedures include:
Checking the LS10 for proper input voltage setting/fuses
Mounting the LS10 chassis in a rack, if desired
Connecting the LS10 unit to other equipment
Connecting the LS10 power cord to a surge protector
2.3 LS10 Rear Panel Connections
Figure 21 shows the rear panel of the LS10. Table 4 gives a description of each connector shown in the
figure. For specific information on the pin-outs of each connector, please see Appendix A of this manual.
