LS10 Installation and Operating Guide
Version 1.01
Appendix F. USB Audio Interface
F-1
Document #: 9301H66300 Ver. 1.01
Appendix F. USB Audio Interface
The Datasat Audio USB interface runs in Class 2 mode. This allows playback of 24/192 audio.
Windows requires installation of a driver to play 176 and 192 KHz audio over USB. Mac or Linux
computers do not require installation of a driver.
Setting up USB Audio on a Mac
1. Connect the Datasat LS10 USB Audio input to the Mac.
2. On the Mac, go to
System Preferences > Sound
.
Figure 1
3. Select
Datasat Audio
as the
Output
. You may also need to select Datasat Audio as
the playback device.
4. Start the Audio Midi Setup utility, which is located in
Applications > Utilities > Audio
MIDI Setup (
Or type
audio
into the spotlight search and click on
Audio Midi Setup
).
5. Click on
Datasat Audio
. Set the audio output to the desired sample rate and choose
the 2ch-24bit Integer or the 2ch-32bit Integer option.
Note
: Some audio players will
adjust the sample rate to the source material.
