LS10 Installation and Operating Guide
Page 38
LS10 Installation & Operating Guide
Document # 9301H66300 Ver. 1.01
2.5.3 Installing/Removing Feet
The LS10 is shipped with feet already installed, for placing on a desktop or shelf. When rack mounting,
the feet may need to be removed for clearance. To remove the feet, simply twist by hand to unscrew.
To replace feet, screw them onto the bottom of the LS10 and hand tighten.
WARNING
: Only use the feet provided with the LS10, which have the correct screw length
to prevent internal damage to the LS10 circuitry.
Figure 27. LS10 Bottom
3.0 LS10 Configuration and Setup
To access the Setup screens, you must use VNC to connect to the LS10 from a separate computer
(desktop, laptop, or tablet). This approach prevents making unauthorized changes to the LS10 setup via
the touch screen on the front panel.
Important!
The Setup screens are intended for use by a qualified installer only.
Password protection is highly recommended.
3.1 How-To Procedures for Setup
This table provides a list of setup activities and provides instructions, or a link to instructions elsewhere in
this manual.
Table 5.
Setup Procedures
ACTIVITY INSTRUCTIONS
Connect to LS10 using VNC
See 3.2 Using VNC to Access Setup Menus, page 39.
Select inputs and assign names
See 3.4 Input, page 41.
Set and check Audio Levels
See 3.5 Audio Levels, page 43.
Set Param EQ
See 3.6 EQ, page 46.
Copy or Clear EQ settings
See 3.6.3 EQ Copy or Clear, page 47.
Foot (4 places)
