LS10 Installation and Operating Guide
Page 36
LS10 Installation & Operating Guide
Document # 9301H66300 Ver. 1.01
Figure 24. Accessing Fuse Block. This one is set to 115V.
4. Remove the fuse block and install correct fuses.
The LS10 uses two 5x20 mm fuses (one on each side of the fuse block):
•
For 115V operation, use two 1.25A, T fuses
•
For 230V operation, use two 0.63A, T fuses
5. Insert the fuses into the fuse block, making sure each fuse is fully seated in the clip. Figure 25
shows the correct position for a 5x20mm fuse.
Figure 25. Fuse Correctly Positioned in Fuse Block
6. Replace the fuse block in the power entry module and verify that the correct voltage setting is shown
(see Figure 22).
2.5 Mounting and Connection
The LS10 may be mounted in a standard equipment rack or placed in a cabinet or on a sturdy surface.
Caution:
Because power line surges can damage the LS10, we require the use of a
properly functioning computer-grade surge /spike suppressor.
Clip
