LS10 Installation and Operating Guide
Page 14
LS10 Installation & Operating Guide
Document # 9301H66300 Ver. 1.01
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where it exits from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, and
does not operate normally, or has been dropped.
Warning and Caution Notices
WARNING:
Before powering on the LS10 for the first time, verify that the correct input voltage
has been selected at the rear panel power entry module. An incorrect input voltage setting will
damage the LS10. See section 2.5.3.
Power Cord to the LS10 rear panel:
The power cord is the main disconnect device. It should
be plugged into an easily accessible outlet with surge protection. The power cord to be used is a
minimum type SVT 18/3 rated 250 Volts AC, 10 Amps with a maximum length of 4.5 M, with one
end terminated in an IEC 320 attachment plug and the other end terminated in a NEMA 5-15P
Plug.
WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture. Do not expose this apparatus to dripping or splashing. No objects filled with liquids,
such as vases, shall be placed on the apparatus.
WARNING:
This apparatus is a Class I product. This product must be connected to a mains
socket outlet with a protective earthing connection.