LS10 Installation and Operating Guide
Page 41
LS10 Installation & Operating Guide
Document # 9301H66300 Ver. 1.01
Select
Mute
to mute or unmute the selected input. When activated, the Mute button turns
red
.
The
Volume
setting can be changed using the up/down arrow keys on your connected computer. A
mouse wheel can also be used.
Note
: On-screen arrow buttons are enabled or disabled by a double-click on the volume
box. The arrows work as on-screen up/down keys.
The following are the controls on the Setup screen:
•
Input
, see page 41
•
Levels
, see
Audio Levels,
page 43
•
Delays
, see page 49
•
Decoder
, see page 50
•
Bass Management
, see page 52
•
System,
see page 64
•
Update
(for software update), see page 62
•
USB,
see USB Save/Restore, page 65
•
LogFile
, see page 66
•
Info,
see page 67
•
Network
, see page 69
•
Access
, see Access Control, page 72
•
EQ
, see page 46
•
Automation
, see
Automation Macros
, page 73
3.4 Input
The LS10 has 15 separate input connections that are ready to use: 8 HDMI, 2 TOSLINK, 2 Stereo, 2
SPDIF, and one USB. You can (optionally) assign a name to the input and make the name visible on the
LS10 touch screen button for that input.
Note
: There are a few configuration items, in addition to those in this section, that are tied
to the input selection. Those items are set independently for each input. The following
three configuration items are affected by the input:
▪
Global delay (not channel delay)
▪
Input Trim
▪
Stereo Input level (only for stereo analog input).
Refer to the sections about these items for more detail.
1. Select
an
Input
(upper left) from the dropdown listing.
