background image

Manual nr: 631 En   Ver. 4  151124

Service manual - English

Keep the service manual where it is accessible. 
The service manual is a document to be used by technicians in combination with training.
RiseAtlas and accessories are made for indoor use and protection against water is IPX4. 
It is strongly prohibited to change or modified the original RiseAtlas product unless stated in this manual.

RiseAtlas is a ceiling lift motor unit (stationary lift unit) that is intended to be used in combination with appropriate  
accessories, such as rail systems and slings, to lift disabled people. RiseAtlas450 (205 kg) and RiseAtlas625 (285 kg) are 
both available in two basic versions with different ways of travelling along the rail. The M-version is manually transferred 
along the rail, while T-version has built-in transfer motor and thereby powered transfer in the rail.

This service manual is a technical document only to be used by trained and authorized service technicians. 

The RiseAtlas lifting unit and the RiseAtlas Trolley must be installed and first-time inspected by authorized personnel,  
inspector or service technician, in accordance with the installation instructions provided by Handicare AB. Periodic 
inspection of the equipment should be done at least once a year. Original spare parts should be used and service/ 
maintenance of the equipment should be in accordance with manual.

SWL
RiseAtlas450: 205 kg/450 lbs
RiseAtlas625: 285 kg/625 lbs

RiseAtlas art. no. 

 

         50100051

 

         50100052

 

         50100053

 

         50100057

                           50100058
                           50100059

 

         50100060

 

       

Valid from serial number: 

RiseAtlas450/RiseAtlas625

System

RoMedic

TM

515120001
515220001
515340001
515720001
515820001
515920001
516020001

Summary of Contents for SystemRoMedic RiseAtlas450

















































Reviews: