UV119UE - DSP 500 : USER MANUAL- v. 4.0
PAGE 29
INSTALLATION
NO YES
The scale must be installed on a perfectly level, stable surface for proper
operation.
It is equipped with a spirit-level to assist levelling.
Adjust the 4 threaded feet of the scale until the bubble in centred in the
reference circle of the spirit level. Fasten the legs using the safety locks.
The scale must be connected to a 220 V., 50 Hz single-phase power
supply in compliance with the rules in force. The electric plant to which
the scale has to be connected should also follow the current safety
standards. The socket chosen for connecting the scale shall:
•
be suitable for use with the scale plug
•
ensure good grounding; the ground connection shall not have
adaptors or extensions
•
be on a dedicated line. In cases where it is not possible, be sure that
the scale is not connected to lines powering other high input devices
(such as: refrigerators, motor-driven equipment)
Attention
:
it is most important that the connection of the scale to the electric mains be
made correctly, for ensuring the scale good operation and for safety
reasons. The manufacturer disclaims all responsibilities for scales installed
without observing the instructions and the rules into force.
Summary of Contents for DSP 500
