DATAPROCESS DSP 500, User Manual

Page: 120 / 120

NEW FEATURES DATAPROCESS S.p.A.
page 8 self-service version
PRE-SET TARE
To enter a pre-set tare tare press the key
[ 4 ]
(see picture 1 e 2 page 6) during the display test, after
the switching on of the scale; after the display test has ended:
1. enter the value of tare using the numerical keys (see picture page 7); the value of tare
must be a multiple of the division of the scale
2. press the key [ ENTER ] (see picture page 7) to confirm
3. press the key [ EXIT ] (see picture page 7) to return to normal operations
The entered tare will be subtracted from the normal weighing operations.
NOTE: Entering a pre-set tare is possible only if the programming function N° 63 “PT” is active
and if there is no weighed tare active.