OHAUS 5000 Quick Start Manual Download

Page: 1 / 4

Quick Start Guide

Defender

™

5000

Ohaus Corporation www.ohaus.com

Defender

™

5000

(with T51 Indicators)

ASSEMBLY

Attach Indicator Mounting
and secure Load Cell Cable.

Remove Scale and
Accessories from carton.

Attach Indicator to Bracket.
Attach Bracket to Column.

Connect Power Cord to Indicator.
Plug Power Supply to Wall Outlet.

Install Platform.
Adjust leveling feet.

Remove Shipping
Spacers.

Not included with

some models.

x 4

The T51XW is supplied with a grounded power cable.
Use only with a compatible grounded power outlet.

Calidad & Servicio, Razones de Peso

Calle 23B No. 81A - 62 Modelia PBX: (571) 410 28 48 Fax: (571) 263 72 24 Bogotá, D.C. - Colombia.

Summary of Contents for 5000

Page 1: ...umn Connect Power Cord to Indicator Plug Power Supply to Wall Outlet Install Platform Adjust leveling feet Remove Shipping Spacers Not included with some models x 4 The T51XW is supplied with a ground...

Page 2: ...RINT is set to Off FUNCTION Initiates an application mode Temporarily displays the active mode s reference data TARE Performs a tare operation Secondary Function Long Press Off Turns the Indicator off...

Page 3: ...s on the scale and check if the reading is accurate If not calibrate using the Calibration Guide ADDITIONAL OPERATIONS Changing Units of Measure Press and hold Units until the desired measuring unit a...

Page 4: ...uto Off Timer Gross Indicator End Readout Reset Weigh Count Percent Dynamic Check Weigh End Mode Reset Kilgram Pound Gram Ounce Pound Ounce Tonne Custom End Unit Reset Date Time User ID Project ID Sca...