DATAPROCESS DSP 500, User Manual

Page: 96 / 120

UV119UE - DSP 500 : USER MANUAL - v. 4.0 PAGE 89
5 - 54 - NETWORK
ADDRESS
F
+ +
5 4
ACCESS FROM LEVEL:
setting network address of the scale
For its use in network configuration, each scale should be given ad address consisting in a numeric
code different for each scale. This function can be used for inserting the scale network address.
After entering this function press
<ENTER>
to access programming as follows:
5 4 N E T W O R K A D D R E S S
< 1 ÷ 1 0 > n n
where:
nn = scale address for network (1 up to 10)
Key in the required address by using the numerical keys and then confirm by <ENTER> .
55 - NETWORK/LOCAL MODE 5 -
F
+ +
5 5
ACCESS FROM LEVEL:
selecting local/network mode
This function allows to program scale to work as a stand-alone unit (local mode) or linked with
other scales (network mode).
Attention : in order to be used in network mode, an address must be assigned to each
scale to be linked (see progr. function
54 NETWORK
mode for address
programming).
After entering this function press
<ENTER>
to access programming as follows:
5 5 L O C A L / N E T W O R K
S C A L E I N L O C A L
Now, the operational mode of a scale can be selected between
SCALE IN LOCAL
or
SCALE IN
NETWORK
by pressing <SEL> . Use key <ENTER> or <EXIT> to return to the initial visualisation.