DATAPROCESS DSP 500, User Manual

Page: 100 / 120

PAGE 92 UV119UE - DSP 500 : USER MANUAL - v. 4.0
7 - 70 - HOT-SHOT
REPORT
F
+ +
7 0
ACCESS FROM LEVEL:
print list of hot-shot keys and corresponding PLU codes
This function is used to get the printout of the complete list of all the hot-shot PLU keys and their
PLU codes, item description included. PLU 0 is printed for hot-shot keys having no PLU assigned
code. The message
*UNPROGRAMMED*
will be displayed instead than the item description in
case that a hot-shot key has been assigned a PLU code but that code was not programmed.
After entering this function press <ENTER> , and the query for confirmation will be displayed as
follows:
7 0 H O T - S H O T R E P O R T
P R E S S E N T E R T O S T A R T
Press
<ENTER>
again and the printing procedure is started. The message
WAIT
is displayed as
printing is on progress. At the end, the scale returns to the function initial display.
71 - PLU REPORT 7 -
F
+ +
7 1
ACCESS FROM LEVEL:
print list of stored PLU
This function is used to get the printout of the list of all programmed PLU, the ones assigned to a hot-
shot key (by the progr. function
00 DIRECT PLU
) or not. Partial list printing can also be selected, by
specifying the start and the end code to be printed. In that case, only the PLU included within the
specified block shall be printed. The item description and price will be listed for each PLU code.
For getting the complete list of the programmed PLU just press
<ENTER>
twice. If a partial list is
required, press
<ENTER>
once and the query for entering the starting code will be displayed, as
shown herebelow. Code 0 corresponds to the first PLU been programmed:
7 1 P R I N T P L U L I S T
F R O M c c c c c c c
where:
cccc
= starting PLU code for print
Type in the starting PLU code requested for print by the numerical keys and then press
<ENTER>
to
visualise the query for the end code to be printed. Code 0 stands for the latest PLU been programmed.
7 1 P R I N T P L U L I S T
U P T O c c c c c c c
where:
cccc
= end PLU code for print
Type in the final PLU code to be included in the list. The message
WAIT
is displayed as printing is
on progress. When the requested list is printed, the scale returns to the function initial display.