Datalogic DM3610 Reference Manual Download Page 67

Page: 67 / 157

DC3000 USER INTERFACE

Field Name

Action/Definition

Name/Revision

application software.

LFT Components

Displays the status, name, expected md5 (checksum), and actual md5
(checksum) for the included Legal For Trade components.

Configuration Options

Units

Select

Imperial

Metric

from the drop-down list. This setting affects

the user interface only and not the dimensioning output. To change the
dimensioning output, see

Modify Settings | Dimensioning |

Settings.

Network Access
Options

Use these fields to change the unit's username and password.

Username

Enter a new username.

New Password

Enter a new password.

Confirm Password

Enter the new password again.

3. When you have finished making changes, click

Update

to save or click

Reset

revert to the previously saved values.

Summary of Contents for DM3610






























































































































































Search results

Summary of Contents for DM3610

Reviews:

Datalogic DM3610, Reference Manual, Page: 67 / 157

Search results

Summary of Contents for DM3610

Reviews: