Datalogic DM3610 Reference Manual Download Page 30

Page: 30 / 157

TWO-HEAD DIMENSIONING SYSTEM REFERENCE MANUAL

Figure 20: 2-Head Dimensioning System Installation

– FRONT VIEW

2.4.9 Mounting Structure Assembly

When using the standard mounting structure provided by Datalogic, assemble as defined in
the application information provided with the structure.

NOTE:

This manual addresses standard two-head system installation. The

information provided here may be superseded by any application specific
drawings provided by Datalogic.

NOTE:

Depending on your specific installation, beam catchers may be

needed to avoid false dimensioning data points.

Tachometer

Direction of conveyor
travel is toward the
viewer

DM3610

HEAD 2

1200mm

[48”]

DC3000
Controller

CBX510

Monitor,
Mouse,
Keyboard
(optional)

Mount and angle the dimensioners based on

your application specifications.

DM3610

HEAD 1

Beam
Catchers

CD141
Display

Summary of Contents for DM3610






























































































































































Search results

Summary of Contents for DM3610

Reviews:

Datalogic DM3610, Reference Manual, Page: 30 / 157

Search results

Summary of Contents for DM3610

Reviews: