Datalogic DM3610, Reference Manual, Page: 39 / 157

MECHANICAL INSTALLATION
29
2
21. In the tree menu under Modify Settings , select Serial | Port 1. The Serial | Port 1
window opens.
22. Under Mode , select RS232 Direct .
23. Under Message Format, select the Legal for Trade Display from the drop-down list .
24. Click Update .
25. In the tree menu under Modify Settings , select Relay. The Relay window opens.
26. From the drop-down list, select Active High or Active Low to match the polarity of
your hardware trigger (Photoelectric Sensor) if the system uses one.
27. Click Update .
28. Power down the DM3610. Repeat the previous configuration steps for each
dimensioner in the system.