Datalogic DM3610, Reference Manual, Page: 32 / 157

TWO-HEAD DIMENSIONING SYSTEM REFERENCE MANUAL
22
2
2.4.11 Mounting the UMBs
1. Position the extrusion to which UMBs will be mounted based on your application
drawings.
2. Since applications may vary, the correct mounting position and angle are defined in
the application mounting structure drawing. Identify the correct location on the
structure and mark the position of the UMB.
3. The UMBs are fastened to the mounting structure with the UMB Mounting Disks,
threaded inserts, set screws, and matching nuts. Place the threaded inserts into the
mounting extrusion tracks one at a time and secure them at the mounting mark with
the set screws provided.
NOTE:
The UMB Mounting Disks are designed for installation to
the T-slots of both Bosch Rexroth (40 and 45 Series) and 80/20®
1.5in aluminum extrusion.
NOTE:
These threaded inserts are what holds the UMB in
position, and once tightened down, should not be touched during
the alignment process.
Figure 22: UMB Mounting Disk Versatility