Datalogic DM3610, Reference Manual, Page: 137 / 157

DIMENSIONING SETUP AND CALIBRATION
127
5
To determine the cuboidal dimensions of an irregular-shaped package:
1. Place the test package on a flat surface.
2. Establish a baseline edge using a straightedge.
Figure 61: Establish a baseline against a straightedge
3. Place delimiters along the straightedge at the ends of the package. Two more
straightedges can be used (preferable), or if necessary, accurate cuboidal boxes can be
used. This determines the length (L) of the package.
Figure 62: Place delimiters along the straightedge
Straightedge
Baseline
Straightedge
Baseline
Delimiter
Delimiter