Datalogic DM3610 Reference Manual Download Page 113

Page: 113 / 157

DC3000 USER INTERFACE

103

Field Name

Action/Definition

Logging Options
(Dimensioning-
specific)

Audit Trail Log

: Opens the Audit Trail Log for viewing in the Log File

section of the screen. Results are scrollable.

Alibi Storage Log

: Opens the Alibi Storage Log for viewing in the Log

File section of the screen. Results are scrollable.

AATM Options
(Alibi and Audit
Trail Manager)

Query First Record

: Displays the first record when selected.

Query Last Record

: Displays the last record when selected.

Query Storage Statistics

: Displays the storage space used and the

remaining space available.

Query Time Range

: Select a

Start Time

and

End Time

by defining

the

Year, Month, Day, Hour, Minutes

and

Seconds

for each.

NOTE

: For accurate Alibi and Audit

management, the dimensioner clock is set
to GMT (Greenwich Mean Time) at the
factory and should never be changed.

Get Updated
Log File

After making the desired selection from the option buttons, click

Update

to view the log in the Log File area of the screen.

Summary of Contents for DM3610






























































































































































Search results

Summary of Contents for DM3610

Reviews:

Datalogic DM3610, Reference Manual, Page: 113 / 157

Search results

Summary of Contents for DM3610

Reviews: