Home
/
DataCard
/
select series
/
User Manual

DataCard select series, User Manual

Share

Page: 126 / 155

background image

B-14

User’s Guide for Select™ Platinum Series™ Printers

Smart card cable

If the Select printer has one or more smart card modules, it uses a smart card cable to
connect the smart card port and the PC. Use a cable that matches the port installed in
the printer. See “Connecting cables” on page 7-3 for information on ports.

Serial cable

The smart card serial cable must be a DB9 serial cable, up to 2 feet (1.8 meters) long
maximum. The smart card serial cable is part number 805815-004.

Figure B-16: Smart card serial cable

USB cable

Some smart card modules use a USB cable. See “USB cable” on page B-13 for USB
cable details.

Replacement keys for optional locks

The optional lock(s) for the card cartridge use keys, for which replacements are
available. Contact your service provider to obtain replacement keys. Be sure to have
the model number of the printer, located on the printer label.

Related publications

This section describes publications for the Datacard® Select™ Platinum™ Series
photo ID printer.

•

User’s Guide for Select™ Platinum Series™ Printers, Part Number 539123-101

This manual provides basic information about using the printer and driver, and
how to care for the printer. The index of this manual includes entries for both the
User’s Guide and the

e

-Guide.

•

Quick Install Chart for the Select™ ImageCard® and Select™ UltraGrafix®
Printer, Part Number 539143-101

This sheet provides a streamlined installation process for typical one-printer-to-a-
PC installation. It also shows supplies and equipment shipped with the printer.

•

e-Guide for Select™ Platinum™ Series Printers, Part Number 539124-001

The online e-Guide provides information about how to fix problems. It also
provides advanced information, such as how to connect two printers to one PC.

•

SmartDriver API Software Developer's Manual, Part Number 526720-001

This manual is part of the SmartDriver Software Developer's Kit (557214-001) and
provides information to programmers who are developing applications to print to

iciv176u

«
...
124
125
126
127
128
...
»

Summary of Contents for select series




























































































































































Reviews:

No comments

Related manuals for select series

Magicolor 2 Desklaser

Brand: QMS Pages: 60

Brand: Raymarine Pages: 135

WorkCentre 7232

Brand: Xerox Pages: 13

CX PRINT SERVER 550

Brand: Xerox Pages: 166

Brand: Xerox Pages: 4

Brand: Xerox Pages: 16

Brand: Xerox Pages: 2

Brand: Xerox Pages: 2

Brand: Oki Pages: 94

DocuPrint 4050 NPS

Brand: Xerox Pages: 248

MICROLINE ML310

Brand: Oki Pages: 32

Brand: SAGEMCOM Pages: 146

Brand: Intuitive Pages: 18

Brand: Citizen Pages: 37

Brand: Konica Minolta Pages: 4

Brand: Konica Minolta Pages: 285

Brand: Ultimaker Pages: 9

Brand: UnionTech Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands