DataCard select series, User Manual

Page: 21 / 155

Using the printer
2-5
User’s Guide for Select™ Platinum Series™ Printers
Loading the print ribbon
The printer uses print ribbon with color panels, continuous color, or color and topcoat.
Full-color ribbon (such as YMCKT) must be Platinum Series ribbon, which uses blue
ribbon spools. Monochrome (one color) ribbon on teal-colored ribbon spools can also
be used. (Full-color ribbon on teal-colored spools cannot be used.)
The type of ribbon in the printer must match the print ribbon setting in the driver.
To order new ribbon, contact your service provider. See “Supplies and cards” on
page B-1 for information about ribbons available.
Remove the print ribbon cartridge
If the printer has a locking cover, unlock the cover before opening it.
1 Lift the top cover, as shown in Figure 2-5.
Figure 2-5: Open the cover
2 Press down on the swing arm until it clicks (step 1 in Figure 2-6). The push latch
releases the swing arm. Lift the swing arm until it is fully open (step 2 in
Figure 2-6).
Figure 2-6: Open the swing arm
i
i
1
2