UMN:CLI
User Manual
V8102
864
To configure the dial plan table, use the following command.
Command
Mode
Description
dial-plan table TABLE_ID TA-
BLE_TOKEN
VoIP-SIP
Adds a dial plan with the configured token.
TABLE_ID: A unique identifier of a dial plan within the
dial plan table
TABLE_TOKEN: the token used by the VoIP service to
process dial plans (This ASCII string is typically delim-
ited by ":".)
no dial-plan table TABLE_ID
Deletes the created dial plan table.
The dial plan created by
dial-plan table
command can be applied only if you configure
the dial plan format as H.248 by using
dial-plan format h248
command.
In order to see the configured dial plan, use
show voip-profile
command.
13.7.3
OMCI-based MGC Configuration
MGCP (Media Gateway Control Protocol) is a signalling and call control protocol used
within VoIP systems that typically interoperate with the public switched telephone network
(PSTN).
If the ONUs are fully provisioned and managed from the V8102 using OMCI, you can
configure the MGC-related settings of these ONUs. The MGC entity defines the media
gateway controller configuration associated with an MG subscriber. It is conditionally re-
quired for ONUs (ONTs) that support MGCP (H.248, Megaco) VoIP service.
You need to enter MGC mode to perform the MGC-related detail configuration. To enter
the MGC mode, use the following command.
Command
Mode
Description
protocol
{
mgcp
|
h248
}
VoIP-Profile
Enters the MGC mode.
To configure the IP address of primary and secondary MGC server that controls the sig-
nalling messages, use the following command.
Command
Mode
Description
mgc
{
primary
|
secondary
}
A.B.C.D
VoIP-MGC
Configures the IP address of primary and secondary
MGC server.
no mgc
{
primary
|
secondary
}
Deletes the configured IP address.
To configure the version of MGCP to be used, use the following command.
Command
Mode
Description
mgc version VALUE
VoIP-MGC
Configures the version of MGCP.
i
i
