UMN:CLI
User Manual
V8102
884
VLANS: VLAN ID(s) (1-4095)
VALUE: CoS (0-7)
igmp upstream rate-limit
<1-
65535>
Configures the rate limit of upstream IGMP traffic
1-65535: IGMP message count (message/second)
igmp unauthorized-join-request
allow
ONU will forward the IGMP join request or an IGMPv3
membership report for groups that is not authorized in
the dynamic address control list table.
igmp unauthorized-join-request
discard
ONU will silently discard an unauthorized IGMP join
request.
To delete a specified IGMP configuration for multicast profile, use the following command.
Command
Mode
Description
igmp immediate-leave disable
Multicast-
Profile
Deletes a specified IGMP configuration
no igmp robustness-variable
no igmp querier address
no igmp querier query-interval
no igmp querier max-response-time
no igmp
{
access-list
|
static-access-list
}
all
no igmp access-list vid
{
untagged
|
VLANS
}
dst-ip start A.B.C.D end A.B.C.D
[
bw VALUE
|
src-ip A.B.C.D
|
gem PORTS
]
no igmp static-access-list vid
{
untagged
|
VLANS
}
dst-ip start A.B.C.D end A.B.C.D
[
bw
VALUE
|
src-ip A.B.C.D
|
gem PORTS
]
no igmp tag-control
no igmp ds-tag-control
no igmp upstream rate-limit
13.11.3
Saving Multicast Profile
After configuring a multicast profile, you need to save the profile with the following com-
mand.
Command
Mode
Description
apply
Multicast-
Profile
Saves a multicast profile configuration.
Whenever you modify a multicast profile, you should apply the changes again using the
apply
command. If you do not, it will not be applied.
i
