User Manual
UMN:CLI
V8102
293
8.3.5
RADIUS Server
8.3.5.1
RADIUS Server for System Authentication
To add/delete a RADIUS server for system authentication, use the following command.
Command
Mode
Description
login
radius
server
A.B.C.D
KEY
[
auth_port
PORT
acct_port
PORT
]
Global
Adds a RADIUS server with its information.
A.B.C.D: IP address
KEY: authentication key value
auth_port: authentication port (optional)
acct_port: accounting port (optional)
no login
radius
server
[
A.B.C.D
]
Deletes an added RADIUS server.
You can add up to 5 RADIUS servers.
8.3.5.2
RADIUS Server Priority
To specify the priority of a registered RADIUS server, use the following command.
Command
Mode
Description
login
radius
server
move
A.B.C.D
<1-5>
Global
Specifies a priority of RADIUS server.
A.B.C.D: IP address
1-5: priority of RADIUS server
8.3.5.3
Timeout of Authentication Request
After an authentication request, the V8102 waits for a response from a RADIUS server for
specified time.
To specify a timeout value, use the following command.
Command
Mode
Description
login
radius
timeout
<1-100>
Global
Specifies a timeout value.
1-100: timeout value for a response (default: 5)
no login
radius
timeout
Deletes a specified timeout value.
8.3.5.4
Frequency of Retransmit
In case of no response from a RADIUS server, the V8102 is supposed to retransmit an
authentication request. To set the frequency of retransmitting an authentication request,
use the following command.
Command
Mode
Description
login radius retransmit
<1-10>
Global
Sets the frequency of retransmit.
1-10: frequency count (default: 3)
i
