User Manual
UMN:CLI
V8102
375
9.4.4
Enabling STP Function
First of all, you need to enable STP function. You cannot configure any parameters relat-
ed to Spanning Tree Protocol without this command.
To enable STP function on the V8102, use the following command.
Command
Mode
Description
spanning-tree
Global
Enables STP function.
To disable STP function from the system, use the following command.
Command
Mode
Description
no spanning-tree
Global
Disables STP function.
To enable STP function on a interface, use the following commane.
Command
Mode
Description
spanning-tree enable
Interface
[XE/VLAN/CG]
Enables STP function per the interface.
To disable STP function from the interface, use the following command.
Command
Mode
Description
spanning-tree disable
Interface
[XE/VLAN/CG]
Disables STP function per interface.
9.4.5
STP Mode
To select the spanning tree mode, use the following command.
Command
Mode
Description
spanning-tree mode
{
mst
|
rstp
|
stp
|
rapid-pvst
|
rapid-pvst+
}
Global
Configures a spanning-tree mode:
mst: Multiple Spanning Tree Protocol (default)
rapid-pvst: Per-vlan Rapid STP
To delete the configured spanning tree mode, use the following command.
Command
Mode
Description
no spanning-tree mode
Global
Deleted a configured spanning tree mode. (default:
MSTP)
