User Manual
UMN:CLI
V8102
461
The V8102 can apply the rate limit with 64 Kbps unit for GE port, and support ingress po-
licing and egress shaping.
To set a rate limit for ports, use the following command.
Command
Mode
Description
rate-limit rate RATE
{
egress
|
ingress dot3x
{
shape
|
drop
}}
Interface
[XE/GE/GPON]
Sets a rate limit for ports. If you input egress or
ingress, you can configure outgoing packet or
incoming packet. The unit is 64 Kbps.
no rate-limit
{
egress
|
ingress
dot3x
}
Clears a specified rate limit for port.
For the ingress rate limit, the flow control should be enabled on a specified port! For more
information of the flow control, see Section
To display a configured rate limit, use the following command.
Command
Mode
Description
show rate-limit
Enable
Global
Shows a configured rate limit.
!
