User Manual
UMN:CLI
V8102
681
To configure an operating network with OSPFv3 on the
VLAN Interface Configuration
mode after specifying the interface to be configured, use the following command.
Command
Mode
Description
ipv6 router ospf
area
{<0-
4294967295>
|
A.B.C.D
}
[
in-
stance-id
<0-255>]
Interface
[VLAN/LO]
Specifies a network with OSPFv3 area ID.
0-4294967295: OSPFv3 area ID
ipv6 router ospf
area
{<0-
4294967295> |
A.B.C.D
} [{
in-
stance-id
<0-255> |
tag
WORD
instance-id
<0-255>
|
tag
WORD}]
no ipv6 router ospf
area
{<0-
4294967295>
|
A.B.C.D
}
[
in-
stance-id
<0-255>]
Deletes the specified OSPFv3 area ID.
To configure an OSPFv3 process tag after specifying the interface to be configured, use
the following command.
Command
Mode
Description
ipv6 router ospf
tag WORD
area
{<0-4294967295> |
A.B.C.D
} [
in-
stance-id
<0-255>]
Interface
[VLAN/LO]
Specifies a network with OSPFv3 tag.
0-4294967295: OSPFv3 area ID
WORD: OSPFv3 process tag
no ipv6 router ospf
tag WORD
area
{<0-4294967295> |
A.B.C.D
}
[
instance-id
<0-255>]
Deletes the specified OSPFv3 tag.
12.3.2
ABR Type Configuration
The V8102 supports 3 types of OSPFv3 ABR which are Cisco type ABR (RFC 3509), IBM
type ABR (RFC 3509), and standard RFC 2328 type.
To configure ABR type of OSPFv3, use the following command.
Command
Mode
Description
abr-type
{
cisco
|
ibm
|
standard
}
Router
Selects an ABR type.
cisco: cisco type ABR, RFC 3509 (default)
ibm: IBM type ABR, RFC 3509
standard: RFC 2328 type
no
abr-type
Deletes a configured ABR type.
12.3.3
OSPFv3 Interface
OSPFv3 configuration can be changed. Users are not required to alter all of these pa-
rameters, but some interface parameters must be consistent across all routers in an at-
tached network.
