AP Blot - SERVICE MANUAL
SECTION 3
MAINTENANCE PROCEDURES
Doc. N° MDS-AP-26-00-02
Rev.01
Date: 02.04.2009
Page 52
3.6.3.2.
Substituting opto PCBs
a)
Remove work area as described in Para. 3.2.1.
b)
Detach connector from Opto PCB to be substituted
c)
Remove fixing screws to undo PCB
d)
Reposition new PCB check that the Opto is not touching the encoder and replace the connector
e)
Reposition work area
f)
Calibrate shaking plane
Connector
Fixing screws
