Dalsa Spyder3 SC-30-02K80-00-R, User Manual

Page: 68 / 111

68 Spyder3 Color Manual
03-032-20059-01 DALSA
Mnemonic Syntax Parameters Description
set exposure mode
sem m
Sets the exposure mode:
2 =
Internal SYNC, internal PRIN,
programmable line rate and exposure
time using commands
ssf
and
set
3 =
External SYNC, internal PRIN,
maximum exposure time
4
= Smart EXSYNC
6
= External SYNC, internal PRIN,
programmable exposure time
7 =
Internal programmable SYNC,
maximum exposure time. Factory setting.
8
= Internal SYNC, internal PRIN,
programmable exposure time. Maximum
line rate for exposure time.
set exposure time set f Sets the exposure time. Refer to the
camera help screen (
h
command) for
allowable range.
set FFC set number sfs
i
Set to load/save using the lpc , wpc , wfc
commands.
set line mode slm
m
Set the line trigger mode as either
external or internal:
e—external line trigger
i—internal line trigger.
set light source sls
i
Set current light source in a range of 0 to
5 .
set lower threshold slt
i
The pixels below the lower threshold are
checked for and reported in the end-of-
line sequence in a range from
0
-
4095
.
set mirroring
mode smm
i Set tap readout direction: left to right, or right
to left
set pixel window
width spw
i
Set horizontal width used in gl, gla, dpc
commands.
set pixel X position spx
i
Set horizontal starting position used in gl,
gla, dpc commands.
set readout mode srm
i
Set the readout mode in order to clear out
dark current charge in the vertical transfer
gates before the sensor is read out.
0
= Auto.
1
= Dark current clear.
2
= Immediate readout. Does not clear
dark current.
set ROI width srw
i
Specify the width of the ROI.
set ROI X srx
i
Specify the starting X position of the ROI.
set subtract
background ssb
i
Subtract the input value from the output
signal.
i
= Subtracted value in a range from
0
to
4095
.
set sync frequency ssf
i
Set the frame rate to a value from
300
Hz
to
18000
Hz (2k model). Value rounded
up/down as required.