Dalsa Spyder3 SC-30-02K80-00-R, User Manual

Page: 26 / 111

26 Spyder3 Color Manual
03-032-20059-01 DALSA
When entering commands, remember that:

A carriage return <CR> ends each command.

A space or multiple space characters separate parameters. Tabs or commas are
invalid parameter separators.

Upper and lowercase characters are accepted

The backspace key is supported

The camera will answer each command with either <CR><LF> ―OK >" or
<CR><LF>"Error xx: Error Message >" or ―Warning xx: Warning Message >‖. The ">"
is used exclusively as the last character sent by the camera.
The following parameter conventions are used in the manual:
•
i
= integer value
•
f
= real number
•
m
= member of a set
•
s
= string
•
t
= tap id
•
x
= pixel column number
•
y
= pixel row number
Example: to return the current camera settings
gcp
<CR>
Baud Rate
Purpose: Sets the speed in bps of the serial communication port.
Syntax:
sbr m
Syntax Elements:
m
Baud rate. Available baud rates are: 9600 (Default), 19200 ,
57600 , and 115200 .
Notes: Power-on rate is always 9600 baud.
The
rc
(reset camera) command will not reset the camera to the
power-on baud rate and will reboot using the last used baud rate.
Example:
sbr 57600
4.2 First Power Up Camera Settings
When the camera is powered up for the first time, it operates using the following factory
settings:

Forward CCD shift direction

RGB color output mode (clm 5)

Exposure mode 7 (Programmable line rate & max exposure time, 625 µs)

1600 Hz line rate