Dalsa Spyder3 SC-30-02K80-00-R, User Manual

Page: 12 / 111

12 Spyder3 Color Manual
03-032-20059-01 DALSA
!
!
Figure 4: Input and Output Connectors
C
B
A
Camera Link (Base Configuration)
+12V to +15V DC
Diagnostic LED A
C
B
2k models 4k model
WARNING: It is extremely important that you apply the appropriate voltages to your
camera. Incorrect voltages may damage the camera. See section 2.4 for more details.
2.3 Power Connector
Figure 5: Hirose 6-pin Circular Male—Power Connector and Table 5: Hirose Pin Description
Hirose 6-pin Circular Male
5
4
6
2
3
1
Mating Part: HIROSE
HR10A-7P-6S
Pin Description Pin Description
1, 2, 3 Min +12 to Max +15V 4, 5, 6 Ground
The camera requires a single voltage input (+12 to +15 V). The camera meets all
performance specifications using standard switching power supplies, although well-
regulated linear supplies provide optimum performance.
WARNING: When setting up the camera‘s power supplies follow these guidelines:

Apply the appropriate voltages. 12 V to +15 V at the camera power input
(after the voltage drop across the power cable). This may mean that the power suppy
may have to provide a voltage greater than the required one, in order to adjust for
this loss. For example, to a12 V at the camera, the power supply may need to
12.5 V or greater.

Protect the camera with a
fast-blow fuse
between power supply and camera.

Do not use the shield on a multi-conductor cable for ground.

Keep leads as short as possible to reduce voltage drop.

Use high-quality
linear
supplies to minimize noise.