Dalsa Spyder3 SC-30-02K80-00-R, User Manual

Page: 65 / 111

Spyder3 Color Manual 65
DALSA 03-032-20059-01
4.19 ASCII Commands: Reference
The following table lists all of the camera‘s available ASCII commands. Refer to
Appendix A for detailed information on using these ASCII commands.
Table 14: Command Quick Reference
Mnemonic Syntax Parameters Description
Help, single
command ? s Returns help on a single command
correction calibrate
fpn ccf Performs FPN calibration and eliminates
FPN noise by subtracting away individual
pixel dark current
Camera Link mode
clm i
Sets the camera‘s bit width where:
0
= GREEN, 8 bits, 1 tap, monochrome
1
= GREEN, 12 bits, 1 tap, monochrome
2
= Mono, 8 bits, 2 taps
3
= Mono, 12 bits, 2 taps
5
= RGB, 8 bit, 3 taps
6
= RGB, 12 bits, 3 taps
9
= RGBY, 8 bits, 4 taps
10
= RGBY, 12 bits, 4 taps
calculate PRNU
algorithm cpa i i Performs PRNU calibration according to
the selected algorithm.
The parameter is the target value to use in
a range from
1024
to
4055
DN.
PRNU Coefficient =
Target
(AVG Pixel Value )
i
i
The calculation is performed for all sensor
pixels but warnings are only applied to
pixels in the region of interest. This
algorithm is useful for achieving uniform
output across multiple cameras.
correction set
sample css m Sets the number of lines to sample when
using the gla command or when
performing FPN and PRNU calibration
where
m is
256
,
512
, or
1024
calibrate white
balancing cwb i Adjust color digital gain to make the color
output to the given value while imaging a
white reference
display pixel coeffs dpc Displays the pixel coefficients in the order
FPN, PRNU, FPN, PRNU, …
enable FPN coeffs efc i Sets whether FNU coefficients are enabled
or disabled. Where
i
is:
0
= FPN coefficients disabled
1
= FPN coefficients enabled
enable input LUT eil i Enable input LUT, where:
0
: Off
1
: On
Parameters:
t
= tap id
i
= integer value
f
= float
m
= member of a set
s
= string
x
= pixel column number
y
= pixel row number