Dalsa Spyder3 SC-30-02K80-00-R, User Manual

Page: 52 / 111

52 Spyder3 Color Manual
03-032-20059-01 DALSA
Setting a Lower Threshold
Purpose: Sets the lower threshold limit to report in the end-of-line
sequence.
Syntax:
slt i
Syntax Elements:
i
Upper threshold limit in range from
0
to
4095
.
Notes: 
LVAL is not high during the end-of-line statistics.
Related Commands: 
els
,
sut
Example:
slt 1024
4.9 Saving and Restoring Settings
For each camera operating mode the camera has distinct factory settings, current settings,
and user settings. In addition, there is one set of factory pre-calibrated pixel coefficients
and up to four sets of user created pixel coefficients for each operating mode.
Factory Settings
On first initialization, the camera operates using the factory settings. You can restore the
original factory settings at any time by setting the user set number to the factory setting
(
sus 0
) and then loading the user set (
lus
).
User Settings
You can save or restore your user settings to non-volatile memory using the following
commands. Pixel coefficients and LUTs are stored separately from other data.

To save all current user settings to non-volatile memory, use the command
wus
. The
camera will automatically restore the saved user settings when powered up.
Note:
While settings are being written to nonvolatile memory, do not power down camera
or camera memory may be corrupted.

To restore the last saved user settings, use the command
rus
.

To save the current pixel coefficients, use the command
wpc
and
wfc
.

To restore the last saved pixel coefficients, use the command
lpc
.
Current Session Settings
These are the current operating settings of your camera. To save these settings to non-
volatile memory, use the command
wus
.