Dalsa Spyder3 SC-30-02K80-00-R, User Manual

Page: 67 / 111

Spyder3 Color Manual 67
DALSA 03-032-20059-01
Mnemonic Syntax Parameters Description
reset pixel coeffs
rpc
Resets the pixel coefficients to 0.
set baud rate sbr i Set the speed of camera serial
communication port. Baud rates:
9600
,
19200
,
57600
, and
115200
. Default:
9600.
set color correction
scc i
Set the values in the color matrix that is
multiplied at the end of the digital
processing.
set ccd direction scd i Sets the CCD shift direction where:
0 =
Forward CCD shift direction.
1 =
Reverse CCD shift direction.
2 =
Externally controlled direction
control via CC3. (CC3=1 forward, CC3=0
reverse.)
set color gain
scg i
Set color gain for current color in a range
of
0 to 65535 . The current color is set from
scl command.
set color selector scl m Selects color for gain application. Used
prior to the
scg command
Set current tap sct t
Selects tap for color gain application. Used
prior to the
scg
command.
set color correction
matrix X index scx m Set current color correction x index in a
range of
o/r/g/b .
set color correction
matrix Y index scy m Set current color correction y index in a
range of
r/g/b/y .
Set exposure
control sec
m This command combined with the slm
command is equivalent to the sem
command.
Set exposure control mode.
If input is t, this mode uses the value set
by the ―set‖ command for the exposure
time
If input is w, this mode uses the width of
the line trigger pulse.
If the user tries to set this mode while
―slm‖ is set to internal, then they will
receive an error: not available in this
mode.
If the user sets the ―slm‘ to internal while
the ―sec‖ value is set to width. The camera
will return a warning message and change
the exposure control to maximum.
If input I is m. The camera uses the
maximum possible exposure time for the
given line rate
.