Daktronics ALL SPORT 5500 SERIES Operation Manual Download Page 97

Page: 97 / 108

Quick Reference

Wrestling

Refer to

Section 6: Wrestling Operation (p� 53)

for detailed operating instructions.

Start-Up

• Turn the Power Switch

• At the

Resume Game? Y/N

prompt, press

<ENTER /YES>

to resume the game

where last shut off, or press

<Clear/NO>

to enter a new sport code number.

Team Score

•

<SCORE +1>

and

<SCORE -1>

increment and decrement the team score.

•

<MATCH SCORE +1>

<MATCH SCORE +2>

<MATCH SCORE +3>

, and

<MATCH

SCORE -1>

increment and decrement the match score.

Match Number

•

<MATCH 1>

increments the match number.

•

<RESET MATCH>

resets the match score and sets match time to the configured

Period length.

Period

•

<1>

increments the period number.

Injury and Blood Time

•

<START INJURY TIME>

<STOP INJURY TIME>

<START BLOOD TIME>

, and

<STOP

BLOOD TIME>

control the injury and blood time out timers.

• The Blood and Injury time can be displayed on the scoreboard using the

Blood/

Injury Show on Main

setting in the

EDIT SETTINGS

Advantage Time

•

<HOME (GREEN) ADVANTAGE>

<GUEST (RED) ADVANTAGE>

, and

<STOP

ADVANTAGE CLOCK>

are used to control the advantage timer. Press the team

advantage key to set the clock to decrease the opposing team advantage time

or increase the selected team advantage time. Press the

<STOP ADVANTAGE

CLOCK>

to stop the advantage timer.

Edit Key Function

• Press

<EDIT>

followed by any of the following keys to edit their respective values:

<TEAM SCORE +1>

<TEAM SCORE -1>

<MATCH SCORE +1>

<MATCH SCORE -1>

<MATCH NUMBER>

<1>

<TIME OUT>

, and

<TIME OUT ON/OFF>

• Pressing

<EDIT>

and

<START INJURY TIME>

<STOP INJURY TIME>

<START BLOOD

TIME>

, or

<STOP BLOOD TIME>

while the time out clock is stopped will edit the

current value of the respective timer.

Summary of Contents for ALL SPORT 5500 SERIES













































































































Search results

Summary of Contents for ALL SPORT 5500 SERIES

Reviews:

Related manuals for ALL SPORT 5500 SERIES

Brands by name

Popular brands

Daktronics ALL SPORT 5500 SERIES, Operation Manual

Search results

Summary of Contents for ALL SPORT 5500 SERIES

Reviews:

Related manuals for ALL SPORT 5500 SERIES

Brands by name

Popular brands