Daktronics ALL SPORT 5500 SERIES Operation Manual Download Page 38

Page: 38 / 108

Basketball Operation

Display

Action

TIME OUTS-HOME
FULL N*

N = current setting

Press

<EDIT>

followed by

<TIME OUT>

for the home or guest team

to display the current setting of full time outs.

Enter the correct full time outs value using the number pad, and

then press

<ENTER>

TIME OUTS-HOME
PARTIAL N*

N = current setting

After accepting or rejecting the number of full time outs, the

number of partial time outs is displayed.

Enter the correct partial time outs value using the number pad,

and then press

<ENTER>

Score (+1/+2/+3/-1)

Display

Action

TEAM SCORE- EDIT
HOME NNN*

NNN = current setting

Press

<EDIT>

and any of the

SCORE

keys for the home or guest

team to display the current team score setting.

Enter the correct team score value using the number pad, and

then press

<ENTER>

Team Fouls (+1/-1)

Display

Action

TEAM FOULS- EDIT
HOME N*

N = current setting

Press

<EDIT>

followed by a

<TEAM FOULS>

key for the home or

guest team to display the current team foul setting.

Enter the correct team fouls value using the number pad, and

then press

<ENTER>

Display

Action

PERIOD- EDIT
N*

N = current setting

Press

<EDIT>

followed by

<1>

to display the current

period setting.

Enter the correct period value using the number pad, and then

press

<ENTER>

Time Out On/Off

Display

Action

TIME OUTS-EDIT
FULL MM:SS*

MM:SS = minutes, seconds

Press

<EDIT>

followed by

<TIME OUT ON/OFF>

to display the

current time setting for full time outs.

Enter the correct full time out time value using the number pad,

and then press

<ENTER>

TIME OUTS-EDIT
PARTIAL MM:SS*

MM:SS = minutes, seconds

After accepting or rejecting the full time outs time setting, the

partial time outs time setting is displayed.

Enter the correct partial time out time value using the number

pad, and then press

<ENTER>

Summary of Contents for ALL SPORT 5500 SERIES













































































































Search results

Summary of Contents for ALL SPORT 5500 SERIES

Reviews:

Related manuals for ALL SPORT 5500 SERIES

Brands by name

Popular brands

Daktronics ALL SPORT 5500 SERIES, Operation Manual

Search results

Summary of Contents for ALL SPORT 5500 SERIES

Reviews:

Related manuals for ALL SPORT 5500 SERIES

Brands by name

Popular brands