Daktronics ALL SPORT 5500 SERIES Operation Manual Download Page 52

Page: 52 / 108

Volleyball Operation

Score (+1/-1)

Display

Action

TEAM SCORE: EDIT
HM CURR: NNN*

NNN = current setting

Press

<EDIT>

and either of the

SCORE

keys for the home or guest

team to display the current team score setting.

Enter the correct team score value using the number pad, and

then press

<ENTER>

Match 1, Sets +1

The

<MATCH 1>

and

<SETS +1>

keys are both edited in the same way.

<SETS

+1>

is used as an example below.

Display

Action

SET NO: EDIT
N*

N = current setting

Press

<EDIT>

followed by the appropriate statistic key to display

the current setting.

Enter the correct value using the number pad, and then press

<ENTER>

Sets Won +1, Subs +1

The home and guest

<SETS WON +1>

and

<SUBS +1>

keys are both edited in the same

way.

<SETS WON +1>

is used as an example below.

Display

Action

SETS WON: EDIT
HOME NN*

NN = current setting

Press

<EDIT>

followed by the appropriate statistic key to display

the current setting.

Enter the correct value using the number pad, and then press

<ENTER>

Aces +1, Kills +1, 1, Digs +1

The home and guest

<ACES +1>

<KILLS +1>

<1>

, and

<DIGS +1>

keys are all

edited in the same way.

<ACES +1>

is used as an example below.

Display

Action

ACES: EDIT
HOME NNN*

NNN = current setting

Press

<EDIT>

followed by the appropriate statistic key to display

the current setting.

Enter the correct value using the number pad, and then press

<ENTER>

Time Out On/Off

Display

Action

TIME OUTS-EDIT
FULL MM:SS*

MM:SS = minutes, seconds

Press

<EDIT>

followed by

<TIME OUT ON/OFF>

to display the

current time setting for full time outs.

Enter the correct full time out time value using the number pad,

and then press

<ENTER>

Summary of Contents for ALL SPORT 5500 SERIES













































































































Search results

Summary of Contents for ALL SPORT 5500 SERIES

Reviews:

Related manuals for ALL SPORT 5500 SERIES

Brands by name

Popular brands

Daktronics ALL SPORT 5500 SERIES, Operation Manual

Search results

Summary of Contents for ALL SPORT 5500 SERIES

Reviews:

Related manuals for ALL SPORT 5500 SERIES

Brands by name

Popular brands