manualshive.com logo in svg

Daktronics ALL SPORT 5500 SERIES, Operation Manual, Page: 20 / 108

Share
Download
Daktronics ALL SPORT 5500 SERIES Operation Manual Download Page 20

Basic Operation

14

Typically, all multiple controller systems will use BCAST 1, CHAN 1 for the first controller in 

Broadcast Group 1 and BCAST 2, CHAN 1 for the first controller in Broadcast Group 2. 

 

All other consoles in a group are added sequentially.

Display

Action

The LCD will toggle between 

these 2 screens. 

RADIO SETTINGS
BCAST X  CHAN YY

ENTER TO ACCEPT
CLEAR TO MODIFY

BCAST GROUP X*
RADIO CHAN  YY

X = broadcast group number

YY = channel number

The LCD shows the current radio settings along with a prompt to 

accept or modify these values.

If the radio settings are correct press 

<ENTER>

.

If these values are incorrect, press 

<CLEAR>

, and the LCD at 

bottom left is shown, allowing edit of the channel or broadcast 

group setting. 

Use the number keys to enter the desired broadcast group and 

press 

<ENTER>

 to accept. The asterisk will move to the channel 

setting.

Edit the channel number to the desired value and press 

<ENTER>

 

to accept.

Broadcast 

Group

Channel 

Setting

Control Scoreboards

0

0

All Scoreboards

1

0

All in BCAST Group 1

1-8

Set to corresponding BCAST 1 

Channel

8*

0

All in BCAST Group 8

1-8

Set to corresponding BCAST 8 

Channel

* Gen V radio receivers have only 4 groups; also, on broadcast 

groups 2 and 4, only channels 1-4 may be used.

Menu

Press 

<MENU>

 to access general and sport-specific options. Use the up and down arrow 

keys to scroll through the menu list. Press 

<MENU>

 again at any time to return to the 

game in progress. Menu settings common to most sport modes are shown below. Refer 

to individual sport mode sections for additional menus and settings. 

New Game

Display

Action

MENU- MAIN
NEW GAME?

Press 

<ENTER>

 to clear all data for the current game in progress 

and begin a new game.

Summary of Contents for ALL SPORT 5500 SERIES













































































































Reviews:

No comments