Daktronics ALL SPORT 5500 SERIES, Operation Manual, Page: 42 / 108

Basketball Operation
36
Shot Clock
Display Action
SHOT CLOCK-TIME
RESET 1 MM:SS*
SHOT CLOCK-TIME
RESET 2 MM:SS*
MM:SS = minutes, seconds
This setting is used for the <RESET> button on the remote shot
clock control console.
Note: The current setting for the <RESET> time displays on the
LCD until the first number key is pressed.
Enter the correct amount of reset time in minutes and seconds
using the number pad, and then press <ENTER> .
SHOT CLOCK-MODE
SYNC W/ MAIN? Y
Press <YES> to synchronize the shot clock with the main clock.
If <STOP> for the main clock is pressed while the main and shot
clocks are running, the shot clock also stops. The shot clock
restarts when <START> is pressed for the main clock.
Press <NO> to allow the shot clock to run independently of the
main clock. The shot clock starts and stops only with the switch
on the remote shot clock control console.
SHOT CLOCK-MODE
AUTO BLANK? Y
Press <YES> to blank the shot clock time when the shot clock
time is greater than or equal to the main clock time. The shot
clock is reset and stopped when the display is blanked to
eliminate inadvertent sounding of shot clock horn.
Press <NO> to display the shot clock time at all times.
Time Outs
If a full or partial time out is not needed for the HOME or GUEST <TIME OUT> keys, enter
zero for the number of time outs.
If a full or partial time out is not needed for
<TIME OUT ON/OFF> , enter zero for the time.
The number for each type of time out must be manually entered for an overtime period
using the <EDIT> <TIME OUT> key sequence for each team.
Display Action
TIME OUTS- MODE
FULL N *
N = current setting
Enter the number of full time outs using the number pad, and
then press <ENTER> .
TIME OUTS- TIME
FULL MM:SS*
MM:SS = minutes, seconds
Enter the amount of time for a full time out in minutes and
seconds using the number pad, and then press <ENTER> .
TIME OUTS- MODE
WARNING MM:SS*
MM:SS = minutes, seconds
A warning horn can be configured to signal the end of a full
time out. While the time out clock is counting down, the horn will
sound for one second when the warning time is reached. Enter
a zero for the time to disable the warning horn.
Enter the time in minutes and seconds using the number pad,
and then press <ENTER> .