Daktronics ALL SPORT 5500 SERIES Operation Manual Download Page 17

Page: 17 / 108

Basic Operation

Single Controller System

In a single controller system (

Figure 5

), all radio receivers and all scoreboards receive

signal from the same console. The default channel and broadcast group settings on the

receiver are not typically modified. An example of this type of system is a gymnasium

with a scoreboard on one or both end walls displaying the same information.

DAKTRONICS

PERIOD

HOME

GUEST

DAKTRONICS

PERIOD

HOME

GUEST

DAKTRONICS

PERIOD

HOME

GUEST

DAKTRONICS

PERIOD

HOME

GUEST

DAKTRONICS

PERIOD

HOME

GUEST

DAKTRONICS

PERIOD

HOME

GUEST

DAKTRONICS

PERIOD

HOME

GUEST

DAKTRONICS

PERIOD

HOME

GUEST

BCAST 1, CHAN 01

BCAST 2, CHAN 01

BCAST 1, CHAN 00

BCAST 2, CHAN 00

BCAST 1, CHAN 02

BCAST 2, CHAN 02

BCAST 0, CHAN 00

to control all at once

BCAST 1, CHAN 01-08

to control a speciﬁ c

scoreboard

BCAST 0, CHAN 00

to control all at once

BCAST 1-2, CHAN 00

to control a speciﬁ c

broadcast group

BCAST 1-2, CHAN 01-02

to control a speciﬁ c

scoreboard

BCAST 1, CHAN 08

BCAST 1, CHAN 01

BCAST 2, CHAN 01

BCAST 1, CHAN 02

BCAST 2, CHAN 02

BCAST 1, CHAN 08

BCAST 1, CHAN 01

Figure 5:

Single Control Console

Typically all single controller systems will use the default setting BCAST = 1, CHAN = 1.

All radio receivers in the system must be set to the same values.

Display

Action

The LCD will toggle between

these 2 screens:

RADIO SETTINGS
BCAST X CHAN YY

ENTER TO ACCEPT
CLEAR TO MODIFY

BCAST GROUP X*
RADIO CHAN YY

X = broadcast group number

YY = channel number

The LCD shows the current radio settings along with a prompt to

accept or modify these values.

If the radio settings are correct press

<ENTER>

If these values are incorrect, press

<CLEAR>

, and the LCD at

bottom left is shown, allowing edit of the channel or broadcast

group setting.

Broadcast Group Setting

[1]

Use this setting for all single controller systems. Use the

number keys to edit this value and press

<ENTER>

to accept.

The asterisk will move to the channel setting.

Channel Setting

[1-8]

Edit the channel number to the desired value and press

<ENTER>

to accept. The CHAN switch on the receiver must

match this value.

Summary of Contents for ALL SPORT 5500 SERIES













































































































Search results

Summary of Contents for ALL SPORT 5500 SERIES

Reviews:

Related manuals for ALL SPORT 5500 SERIES

Brands by name

Popular brands

Daktronics ALL SPORT 5500 SERIES, Operation Manual

Search results

Summary of Contents for ALL SPORT 5500 SERIES

Reviews:

Related manuals for ALL SPORT 5500 SERIES

Brands by name

Popular brands